“BIM for Building management” – an article by our director Paul Beaty- Pownall features as a part of a new illustrated case studies book: “Innovative Vectorworks BIM“ . It explains how we arrange our projects to focus on the needs of the end user, by sub-dividing the project into zones and volumes that are structured to suit the buildings functional requirements in use. As we work in a variety of sectors, including Further and Higher Education, Rail and Regeneration, we have found that each project requires a BIM Structure that responds to the way it will be managed. Paul’s article is an overview account of our BIM implementation and describes how we use it as a form of communication, improving accuracy and efficiency in delivering the projects.
Vectorworks in Practice
Setting up a BIM project to support the
clients building management team
The benefits offered by the preparation of good BIM data,
will have the greatest impact during the buildings period of occupation, long
after it has been completed on site. BIM
should act to support the management of the building, to enable the facilities
team to let space, control rental income, manage the cost of bills, maintain
equipment and organise long term repairs, and the government hopes to achieve
the greatest savings in cost and carbon through the use of BIM systems during
the period when the building is in use. But
in order to achieve this goal, BIM projects need to be structured to suit the
clients building management team’s requirements from the early inception stage
of the design process.
Paul Beaty-Pownall a Director at bpr architects, explains how they structure their projects to focus on the needs of the end user, by sub-dividing the project into zones and volumes that are structured to suit the buildings functional requirements in use. bpr work in a variety of sectors, including Further and Higher Education, Rail and Regeneration, and have found that each project requires a BIM Structure that responds to the way it will be managed.
The BIM structure must also support the construction team to ensure that the supply chain receives relevant packages of data and that the contractor’s Project Information Model provides the building management team with a useful set of information. A properly structured BIM Project will enable efficient workflow for the wider design team and has helped bpr distribute work packages and responsibility across their own team of architects.
This chapter looks at how bpr architects use Vectorworks as their primary tool for the preparation of good BIM Projects. As bpr use the functions within Vectorworks, including work group referencing, design layers and stories to shape a model, that is then shared with the wider team by exporting to IFC.
bpr are based in West London and comprise a team of 16
architects, working on a wide range of University, Rail and Regeneration
projects. As a second generation family
business we have developed strong values that aim to support our staff to
define their personal aspirations and challenge them to achieve their
goals. We have recently taken the
company to the next stage in its evolution by transferring all the company
shares to a trust, entrusting the ownership of the business in the staff that
We encourage our staff to take responsibility for their designs and we train them to manage projects efficiently, to lead the design process. As such, the working culture at BPR fits well with the new working practices that are expected from teams that are working in the BIM environment.
BIM requires a much greater level of collaboration, where every individual action should focus on making a positive contribution to the project as a whole. As an Employee Owned business we provide an open and collaborative environment and it is common practice at bpr for information to be shared to support each other knowing that this will be to the benefit of the business as a whole.
A positive working environment, based on trust. These values are also essential to the success of the wider BIM Project team and the sharing of project data through an open and honest set of rules facilitates a collaborative design team, working together to the benefit of their projects.
BIM Implementation at bpr
bpr found that the recession of 2007/8 provided an opportunity to introduce new working practices to a smaller team reduced by necessity.
It was also around this time that the government published its
intensions to press the industry to adopt BIM and to mandate that all public
sector projects must be delivered using BIM Level 2 standards from 2016. Our key clients include a number of
Universities, Network Rail and a range of Train Operating Companies, all predominately
funded by the Public Sector. We realised
that we would need to adopt BIM working practices if we were going to be able
to support our clients past 2016.
We initially established what this meant to our team and their training requirements, the type of software we needed and its impact on our hardware. We found that our Vectorworks CAD package already had the necessary capabilities to deliver architectural design information to BIM standards, and provided we kept Vectorworks up to date, it wasn’t necessary to buy any new software.
test the systems I undertook a small BIM pilot project, replicating a set of
drawings for a small gatehouse building that had already been completed for
which we had a very good set of example working drawings. The task I set myself was to prove that BIM
methods could replicate the same level and quality of information that we were
accustomed to using 2D techniques.
I quickly realised that I was being far too ambitious in my determination to re-produce all 2D information from a single source 3D model. But it was a very useful exercise for testing the capabilities of the software, demonstrating the potential of BIM to the more traditional members of the team, and pushing the limits of our hardware. The pilot project gave us the confidence to apply BIM methods to our live projects, knowing that we could still replicate the information produced in a 2D format as necessary.
This shift to BIM required us to fundamentally change the way we worked. Luckily we didn’t have to change our basic CAD package which kept our training needs to a minimum, but we did have to change the tools that we were in the habit of using and more significantly, we had to change the way we approached and developed the project.The sequential development of the design became far more interactive. Rather than developing design ideas, then using a 2D plan to test the special arrangement before developing sections, elevations and 3D models, BIM allows us to develop all of these elements in conjunction with each other. BIM Workflows enable architects to prepare a 3D model, to present a concept, from which the relationship, size and hierarchy of rooms can be tested and plans sections and elevations called off.
This change in thought process has had a positive and
possibly fundamental impact on our ability to develop ideas and present the
design proposal to the team. We can now
explore challenging design ideas, and quickly show how they might improve the
project. We can also respond to requests
for changes by other members of the design team and test their effectiveness,
without having such a significant impact on the design programme.
However this process of change can be difficult to adopt for experienced architects who have become expert at using traditional 2D techniques supported by 3D models. The natural enthusiasm to impress your client with a high quality presentation by using tools that you are familiar with, has had to be supressed in order to ensure that we take the time to learn new tools and techniques using the wider capabilities of Vectorworks to better support our clients in the long term.
A level of technical discipline has had to be imposed to ensure that everyone uses parametric tools and objects for all drawing elements that already contain IFC data, and are therefore ready to be exported and shared with the other members of the design team. The need to use parametric objects has also imposed a new way of using CAD for design, for example a staircase is no longer designed using plans, sections and a calculator. Instead the dialogue box offered by the stair tool asks for the designer to enter basic numerical requirements from which Vectorworks will draw the stair. Designing by numbers can feel a bit remote for an experienced architect, but the solution can be rewarding and more reliable with the stair available for use in all drawing formats. However extra care needs to be taken that the result is also elegant and achieves the desired level of quality of performance and that we don’t assume that Vectorworks will design for us.
The choice of which tools to be used and how to use them to deliver the right level of information for the project stage, is key to managing a BIM project efficiently. Parametric tools are capable of saying too much too soon which runs the risk that decisions can appear to have been made long before they have been agreed with the wider team. For example the wall tool can very easily illustrate components such as inner skin-cavity-cladding at feasibility stage, long before the wall construction has been determined.
The effort we have spent over the last 7 to 8 years to embed BIM working practices in everything we do at bpr is now beginning to pay off. The information we produce is more robust, and we are able to share this information with the other members of the design or client team, but most importantly, I believe that our designs are becoming better, as a result of being able to explore and test ideas with greater confidence.
Structuring the BIM project
A BIM project must be carefully structured to anticipate the
requirements for the building lifecycle as information contained in the model could
be used long after completion of the construction works and the government
expects the significant savings in cost and carbon to be achieved through
improvements in building management.
Savings during design and construction phases only provide a small
portion of the overall benefits of BIM compared to those available during use.
The structure of the BIM model therefore needs to be considered in the context of how the end user will make use of the BIM data. Discussions with the buildings facilities management team and an understanding the software they use will have an impact on the strategic decisions that need to be made at the very start of a new project.
We are currently at a very early stage of developing systems that share data effectively with facilities management software and it is hard for building managers to anticipate how a new building will be used and managed, often some years ahead of when it will be finished and occupied, but thinking ahead is essential if BIM systems are to work effectively during the buildings life time.
We have found that much of the data required is automatically generated by Vectorworks through the use of parametric objects, such as the Space Object tool, that are already structured to deliver IFC and COBIE data. Additional data can then be added in different ways, tailored to the clients individual requirements. For example we can add the opening times for a room or the performance criteria for heating and lighting of the space in the Space Object, and the tangible benefits of improving access to and management of this data can be passed on to end users, or packaged as part of tenancy benefits..
We have found the process of dividing a project into zones and volumes presents a fundamental challenge, which is critical to the management of the data in the long term. Zoning must be considered in terms of end users short term and long term building management regime. For example a commercial office block might be separated into 3 zones including; External Envelope, Cores and Fit Out. This split would coordinate with the FM team’s planned operations for each of these zones in accordance with their different priorities and timescales as follows:
The External Envelope zone may require occasional repairs or renewals. Window replacement programmes for example may be needed every 20 years, while routine maintenance to gutters and downpipes may require coordination so that scaffolding can pick up other minor repairs to walls and eaves etc. The external envelope often remains under the control of the landlord or management company as a single owner.
The Cores zone would receive more regular attention, with a
number of term contracts agreed for the on-going maintenance of lifts, alarm
systems or vertical or horizontal services distribution systems. The ownership and liability for the cost of
maintaining the cores can be more complex and may require separate metering of
supplies and separate billing to the various occupants.
Finally the Fit Out zone may be leased to a number of different owners, and wholesale renewal of the internal partitions, ceilings and fittings may be carried out on a regular basis. The cost and responsibility for these works may lie with the tenant. The ownership of the BIM data associated with these works would therefore need to be separated from the other zones and lines of responsibility understood.
The sub-division of a building into zones for a typical commercial building as described above is just one example of how zones could be used to define parts of a building to generate data and structure the BIM information to suit the facilities management strategy. We have found that the principle of External Envelope, Cores and Fit Out zones also works well for some other building types, for example for our residential or university building projects, where the management regimes have strong similarities. Universities often allocate internal areas to different faculties, who then take the lead on planning their internal spaces and as long term operators of the estate they know the value of improved coordinated tracked management and maintenance. Residential buildings can be sub-divided into separate leased residential units.
However, the same structure doesn’t necessarily work for our railway station projects. Railway property has a much more complex ownership structure and responsibility for management. It is also difficult to define appropriate zones for some regeneration projects that are known to be speculative where the design will be sold following a successful planning approval. The design and management strategy may well change before it is taken to the construction phase.
Structuring the BIM project effectively to suit the end user
can be difficult, and we don’t always get it right from the outset, but once a
zone structure has been agreed with the client team it can then be used to
examine the needs of the construction and design phases. Packages of data can be developed that align
with the procurement contracts.
Structural information, windows packages, partitioning packages,
services etc. can be exported from the model to support the procurement
process, in line with the long term maintenance requirements for each package
as defined by the zone.
An agreed system for the production of COBie data outputs can feed directly into existing FM systems, maintaining the integrity of the data between construction and use and acting as an intelligent part of an on-going asset management and maintenance strategy. This tangible benefit offered to end users and building managers has allowed us to demonstrate the critical value of BIM to clients and its significance as a method of data coordination and communication.
Zones also help to reduce the size of the individual data files that are being worked on during the design phase. Using Vectorworks workgroup referencing we are able to distribute individual files to a number of architects who might be working on the same project at the same time. Each zone is prepared in a separate Vectorworks file that can be brought together through a masterplan ‘all zones’ file. While for larger projects we also create a publications file from which we can generate all the 2D drawings and images. IFC data can be exported directly from the individual model file, with a separate IFC package for each zone.The careful management of Zones has therefore given us an effective way of organising the team, managing the size of the files, coordinating construction packages and establishing working parameters which act to generate useful data for the client beyond completion.
Collaboration with the wider team
Taking our experience out of the office, and sharing this with the wider design
team has been equally rewarding.
I introduced the concept of BIM to the design team for a new station building project and found the BIM execution Plan an essential tool for pulling everyone together around an agreed set of rules. The idea that we would all use the same set of codes for naming files, zones, layers, classes etc. was well received, but the most extraordinary thing was that we have never done this before!
There have been various attempts in the past, to standardise or codify naming systems. But they have been used by different organisations in different ways, and have tended to be over-ruled by the companies own internal quality management system. The simple principle of using a single project code followed by a set of agreed fields for a file name is a big leap but on its own represents significant progress towards effective collaboration, establishing a baseline language from which we can all work.
We have had to review our own quality management systems to facilitate BIM within our own company as BIM is as much a process of how we communicate as it is a method by which we prepare our design proposals.
Efficient communication with the wider design team is also dependant on properly defined zones and volumes. The structural engineer might take responsibility for the structural volume, which might overlap with the core zone and external envelope zone. Volumes can cross between zones, but are also classified as ‘Z’ under the BS1192. We have therefore suggested the use of two digits for our zones, for example Z10 for the external envelope with Z11 being the architectural volume within the external envelope and Z12 being the structural volume within the external envelope etc.
As can be seen, the sub-division of a building project into
different parts can become very complicated, more so if a project includes a
number of different buildings on the same site which might also have different
uses. I recommend that time is spent
with the client to carefully prepare the right zone strategy and the long term
benefits of this initial strategy explained in terms of long term data outputs. We are still testing a number of options suitable
for different projects or sectors, but we are primarily relying on the
principle that provided the definition of each zone and volume is agreed with
the team from the outset and enshrined in the BIM Execution Plan this
established set of parameters and language will enable the communication
systems and exchange of data.
The critical base information that enables different team members to collaborate; such as Project Code; Location; Orientation; Levels; Zones etc. must be written into the BIM Execution Plan and agreed by the team through the CIC protocol which is now attached to our contracts of appointment. The plan also defines the BIM Goals and schedules the deliverables that can then be produced from the model.
We have drafted a number of BIM execution Plans to deliver ‘pilot’ projects that enable us to test and develop the new regime. This allows us to respond to site constraints and the capacity of the wider design team to support the BIM environment. We have identified and excluded areas of work that would be too complex to include in the BIM model in terms of data management over the relative benefits, and have identified wider team members whose design contribution sits outside of the BIM process and are not able to meaningfully contribute to the BIM process.
For example, the preparation of a Bill of Quantities as a deliverable from a BIM Project may be possible, but would make a significant demand on the team to structure the data suitably. Take a carpet finish, which may appear as a component in the floor object tool. It might also be referred to in the finishes schedule via the Space Object Tool and be detailed in the specification. A direct extract of data to create a Bill of Quantities would effectively measure the carpet 3 times, for each location it has been identified.
Our BIM Execution Plan to date have therefore exclude the production of a Bill of Quantities as a deliverable until the design team fully understands the implication of how they are preparing the data. This defines what is expected from the model from the outset, which helps the team control the production of data and manage their resources appropriately.
The really exciting outcome from working in a BIM environment comes when we bring several models from different sources together, to coordinate the architects and engineers design proposals. We export from Vectorworks to IFC and then combine the design models through an IFC viewer such as Solibri or Tekla, the federated design can then be examined to look at the spaces, and identify any problems or conflicts.
The IFC viewers are very powerful, and produce automatically clash detection schedules identifying where two objects occupy the same space. But this can often lead to an excessive list of minor conflicts that have little or no impact on the quality of the information available. For example a door frame might clash with the space object, and it would seem unnecessary to draw the space around every architrave to resolve this conflict. Furthermore, the area of a space is normally measured to the line of the finished plaster behind the timber trim, and drawing around the trim would distort the area measurements.
We therefore tend to use IFC viewers to undertake a visual check, and have found that the simultaneous display of packages allows for a superior efficiency of design check and coordination compared to traditional review of separate packages of information. We can cut sections and view the information from any angle quickly identifying issues taking snap shots to produce intelligent clash reports which can be shared through the IFC viewer, so that each member of the design team can amend their model and the federated model can be updated with the new information.
Throughout this process, our role as architects and lead designers remains the same. We are still responsible for co-ordination and leading the design team and BIM does not replace our duty to check and report on conflicts where pakages must work seamlessly together. However BIM does provide some vastly superior tools with which we can carry out this role enabling us to improve accuracy and efficiency.
We see BIM as a form of communication that helps different consultants share information through a set of agreed rules, which will help the team to understand each other’s language. I read once that it is similar to getting all the countries of Europe to talk to each other, without the need for any of them to learn a new language.
BIM requires us to undertake a cultural shift in the way we manage our design information and it also requires that the design team be much more transparent and open about how this information is shared. As lead designers and BIM Information Managers, I believe that we now have an additional role; to nurture design teams, to bring them together round a new code of conduct and show them that the culture of trust developed through BIM can lead to significant benefits to the project.
Paul Beaty-Pownall, Director, bpr architects Ltd